Villa Butterfly - Operating Instructions

Control Panel

The control panel is located on the black label positioned in the lower middle section of the Jacuzzi.

 

STEP-BY-STEP OPERATION

 

1. Activating the Jets

  • Press the “Jets 1 & 2” button to activate Jets 1 and 2.
  • Press the “Jet 3” button to activate Jet 3.

2. Activating the Blower

  • Press the “Blower” button to start the air blower system.

3. Using the Lights

  • The lights turn on automatically.
  • To change the light colors, press the “Lights” button.

4. Temperature Control

  • The water temperature is set automatically.
  • No manual adjustment is required.

5. Automatic Shut-Off

  • The jets operate for a specific period of time and will turn off automatically.
  • To reactivate them, repeat the steps above.

Notes

  • Ensure the Jacuzzi is filled with water before activating any functions.
  • Do not operate the system for extended periods without supervision

✅ Before Use

  • Please shower before entering
  • Remove oils, lotions, and sunscreen as much as possible
  • Do not use the jacuzzi if you feel unwell

🌡️ Temperature & Time Limits

  • Water temperature is set between 35–37°C
  • Recommended use: 15–20 minutes maximum per session
  • Take breaks between uses to avoid overheating

🚫 Rules

  • No glass, food, or drinks inside the jacuzzi
  • No diving or jumping
  • Children must always be supervised
  • Not recommended for pregnant guests or people with heart conditions

💧 Water Care

  • Do not add soaps, oils, or bath products
  • Please keep the water clean
  • If water appears cloudy or unusual, inform us

⚠️ Safety

  • Slippery surfaces — enter and exit carefully
  • Avoid alcohol before or during use
  • Use at your own risk

🧼 After Use

  • Turn off jets if still running
  • Replace the cover after use (if applicable)
  • Leave the area clean and tidy

 

         STEP-BY-STEP INSTRUCTIONS

 

1. Check the heater before turning it on

  • Make sure nothing is on or touching the heater.

  • Check that the sauna stones are in place.

  • Make sure the air vents are open and the door can close properly.

2. Find the two controls

  • One control is the timer.

  • The other control is the thermostat or temperature control.

3. Set the timer to start heating

  • Turn the timer knob to the immediate start section (Numbers 1 or 2)

4. Set the temperature

  • Turn the thermostat knob to maximum

5. Let the sauna heat up

  • Close the sauna door.

  • Wait about 20-25 minutes for the sauna to warm up.

6. Check if it is hot enough

  • Enter carefully and test the heat.

  • If needed, raise or lower the thermostat slightly.

7. Add water to the stones

  • Use a ladle to pour a small amount of clean water onto the hot stones.

  • This creates steam.

  • Do not pour too much water at once.

8. Use the sauna

  • Sit or lie on the bench.

  • Stay inside for a comfortable amount of time.

  • Leave if you feel dizzy or too hot.

9. Turn the heater off when finished

  • Turn the timer knob back to 0.

  • Turn the thermostat down if desired.

10. Let the sauna cool and dry

  • Leave the door slightly open after use.

  • This helps the sauna dry out.

Important safety rules

  • Never cover the heater.

  • Never place towels, clothes, or objects on it.

  • Only use clean water on the stones.

  • Do not use the sauna if the heater seems damaged.

Simple quick-use version

  • Check heater

  • Turn timer to ON

  • Set temperature to Maximum

  • Wait 20-25 minutes

  • Add a little water to stones

  • Enjoy sauna

  • Turn timer back to 0 when done

 

Hammam (Steam Room) – Instructions

 

1. Before starting

  • Make sure water and electricity are connected
  • Check that the steam outlet is clear

2. Close the door

  • Ensure the steam room door is fully closed

⚠️ The generator will not start or work properly if the door is open

3. Turn on the generator and lights

A. Press any button to activate the control screen

B. Press the power button to start the generator (sometimes 2 times)

C. To confirm correct operation, you will see the room temperature displayed in large numbers on the screen

D. The generator will begin filling with water and heating

E. To turn on the lights, press the button “coloured lights” and use the set “up” or “down” buttons to change colours

 

4. Wait for steam

  • Steam starts in 5–10 minutes (when water temperature reaches 102–104°C)
  • Full steam in 10–20 minutes

⚠️ Keep the door closed at all times

5. Enter and use the hammam

  • Enter after steam has formed
  • Relax for 10–20 minutes

6. Timer

  • The timer is set to 45 minutes from the moment you start the procedure

7. After use

  • Exit the steam room
  • Press OFF on the control panel only if the system has not already turned OFF automatically by the TIMER

8. After finishing

  • Leave the door slightly open to dry the room

⚠️ Important

  • Always close the door before turning the generator ON
  • Do not open the door frequently during use
  • Do not touch the steam outlet (very hot)

💡 Quick steps

  • Close door
  • Press any button → press power (sometimes 2 times)
  • Check temperature appears on screen
  • Turn on lights if desired
  • Wait 10–15 min
  • Enter and enjoy
  • Timer: 45 minutes
  • Turn OFF (if still running)

 

🏊‍♂️ Swimming Pool Instructions

 

🔥 Heated Pool

  • The swimming pool is heated from April – mid June & mid September – November
  • Water temperature is maintained at 27–28°C

✅ Before Entering

  • Please shower before using the pool
  • Do not use the pool if you are feeling unwell
  • Children must always be supervised by an adult

🚫 Pool Rules

  • No diving (pool depth is limited)
  • No running around the pool area
  • No glass items in or near the pool
  • No food or drinks inside the pool

💧 Water Care

  • Do not use oils or excessive sunscreen before entering
  • Do not add any substances to the water
  • If you notice anything unusual, inform us immediately

⚠️ Safety

  • Use the pool at your own risk
  • Slippery surfaces — walk carefully

🧼 After Use

  • Rinse off after swimming

Washing Machine – Instructions

1. Before starting

  • Make sure the machine is connected to water and power
  • Open the water tap
  • Check that the drain hose is properly placed

2. Load the laundry

  • Open the lid
  • Place clothes evenly inside the drum
  • Do not overload
  • Close the lid properly

3. Add detergent

  • Add detergent into the designated compartment or directly into the drum (depending on model)
  • Add fabric softener if desired

4. Turn on the machine

  • Press the Power ON/OFF button

5. Select a program

Choose the appropriate wash program, for example:

  • Cotton → everyday clothes
  • Synthetic → mixed fabrics
  • Delicate → sensitive fabrics
  • Quick Wash → light loads
  • Steam → deeper cleaning and hygiene

6. Adjust settings (optional)

  • Set temperature, spin speed (up to 1200 rpm), or extra options if needed

7. Start the wash

  • Press the Start/Pause button
  • The machine will begin filling with water and washing

8. During operation

  • Do not open the lid while running (safety lock may activate)
  • The machine may pause automatically during cycles

9. End of cycle

  • When finished, the machine will stop and unlock
  • Open the lid and remove clothes

10. After use

  • Leave the lid slightly open to allow drying
  • Turn off the machine if needed

⚠️ Important safety instructions

  • Do not overload the drum
  • Use the correct type of detergent (for automatic washing machines)
  • Keep hands away from the drum while operating
  • Ensure the machine is on a stable, level surface

💡 Quick steps

  • Load clothes
  • Add detergent
  • Press Power
  • Select program
  • Press Start
  • Remove clothes when finished

🍽️ Dishwasher – Instructions

1. Before starting

  • Make sure the dishwasher is connected to water and power
  • Open the water tap
  • Check that the filters and spray arms are clean

2. Load the dishes

  • Open the door
  • Place dishes in the racks:
    • Lower rack → plates, pots, large items
    • Upper rack → glasses, cups, small items
  • Do not block the spray arms
  • Do not overload

3. Add detergent

  • Open the detergent compartment
  • Add:
    • Dishwasher tablet OR powder
  • Close the compartment

👉 Add rinse aid if needed (for better drying)

4. Turn on the dishwasher

  • Press the Power ON/OFF button

5. Select a program

Choose the appropriate program:

  • Eco → energy saving (recommended)
  • Auto → automatic adjustment
  • Intensive → heavily soiled dishes
  • Quick → short cycle
  • Glass/Delicate → fragile items

6. Start the program

  • Close the door firmly
  • Press the Start button

👉 The dishwasher will begin washing

7. During operation

  • Do not open the door while running (hot steam may escape)
  • If opened, the cycle may pause automatically

8. End of cycle

  • Wait a few minutes before opening (steam inside)
  • Open the door carefully
  • Remove dishes

9. After use

  • Leave the door slightly open to dry
  • Clean filters regularly

⚠️ Important safety instructions

  • Use only dishwasher detergent
  • Do not wash wooden or non-dishwasher-safe items
  • Keep children away during operation
  • Be careful of hot steam when opening

💡 Quick steps

  • Load dishes
  • Add detergent
  • Press Power
  • Select program
  • Press Start
  • Wait → unload
Villa 🦋 Butterfly